Bradford White FVIR Defender Safety System® 40 gal. Short 40 MBH Residential Natural Gas Water Heater - Model BRG240T6N - Item code 1104

Price includes removal of old unit and disposal, supply and install new unit

Bradford White's residential, atmospheric vent, extra recovery, energy saver, gas water heater features theDefender Safety System®. This heater utilizes a draft diverter and is atmospherically vented. Extra recovery translates into an increased amount of hot water available at a usable temperature in less time than normal.

Features:
Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity.
Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials.
Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels.
Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
Pilot On Indication - Flashing green LED provides positive indication that pilot is on.
Separate Immersed Thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
Advanced ScreenLok® Technology Flame Arrestor Design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater.
Resettable Thermal Switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow.
Maintenance Free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions.
Sight Window - Offers a view into the combustion chamber to observe the operation of the pilot and burner.
Factory Installed Hydrojet® Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
Vitraglas® Lining - Bradford White tanks are lined with a exclusively engineered enamel formula that provides superior protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600ºF.
Side Connections - 3/4" NPT tappings allow easy connections for space heating applications (Potable water only).
2" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity (M-1-XR403S has 1").
Pedestal Base.
Water Connections - 3/4" NPT factory installed true dielectric fittings.
Factory Installed Heat Traps.
Protective Magnesium Anode Rod.
3x4 "Snap Lock" Draft Diverter - Allows either 3" or 4" vent connections with inputs of 40,000 BTU/Hr or less. Over 40,000 BTU/Hr. has the 4" "Snap Lock" Draft Diverter.
T&P Relief Valve - Included.
Brass Drain Valve - Tamper proof design.

Bradford White Water heaters are one of the best water heaters that are known for their durability, energy efficiency, and performance. They produce both traditional tank-style water heaters and tankless water heaters. At Instally Long island offered by All island comfort , our technicians ensure that your new water heater will be installed as per the manufacturer regulations and our technicians are certified by Bradford white.

Some of the popular types of water heaters offered by Bradford White include:
1. Gas Water Heaters: These water heaters use natural gas or propane as a fuel source. They are available in various sizes and capacities to suit different hot water demands.
2. Electric Water Heaters: Electric water heaters utilize electricity to heat the water. They are often chosen for their simplicity of installation and ease of use.
3. Tankless Water Heaters: Also known as on-demand water heaters, these units heat water directly as it passes through the unit without the need for a storage tank. Tankless water heaters are known for their energy efficiency and continuous hot water supply.
4. Indirect Water Heaters: Indirect water heaters work in conjunction with a boiler or a solar heating system. They use the heat generated by these systems to heat the water indirectly.
5. Heat Pump Water Heaters: Heat pump water heaters extract heat from the surrounding air and use it to heat the water. They are highly energy-efficient and can provide substantial savings on energy costs.
Bradford White is committed to producing high-quality water heaters and provides comprehensive warranty coverage on their products. They also offer customer support and have an extensive network of authorized service providers for repairs and maintenance.
When selecting a Bradford White water heater, it's important to consider factors such as your hot water needs, fuel availability, space availability, and energy efficiency requirements. Consulting with us can help you determine the right water heater model and size for your specific needs.



Help full information to repair your Bradford White water heater:
If you're experiencing issues with your Bradford White water heater and need to repair it, here are a few general steps you can take:
1. Identify the problem: Determine the specific issue with your water heater. Common problems may include a lack of hot water, inadequate water temperature, leaking, unusual noises, or pilot light problems.
2. Consult the user manual: Refer to the user manual provided by Bradford White for troubleshooting steps specific to your model. The manual can often be found on the manufacturer's website or by contacting their customer support.
3. Check for power and gas supply: Ensure that the water heater is receiving power and that the gas supply (if applicable) is connected and functioning properly. Check circuit breakers, fuses, and gas valves to rule out any electrical or gas supply issues.
4. Inspect the pressure relief valve: The pressure relief valve is a safety feature on water heaters. If it's leaking or releasing water, it may need to be replaced. Follow the manufacturer's instructions for checking and replacing the valve if necessary.
5. Flush the tank: Sediment buildup can reduce the efficiency and lifespan of your water heater. Flushing the tank can help remove any accumulated sediment. Refer to the user manual for instructions on how to perform a flush.
6. Replace faulty components: If you've identified a specific faulty component, such as a heating element or thermostat, you may need to replace it. Contact Bradford White or a professional plumber to obtain the correct replacement parts and follow the manufacturer's instructions for installation.
7. If you're unsure about troubleshooting or repairing your water heater, or if the problem persists after attempting the above steps please call us we are a Bradford White's authorized service center for professional assistance.
Remember, these steps are general guidelines, and the specific repair process may vary depending on your water heater model and the nature of the problem. Always prioritize safety when dealing with electrical or gas appliances, and consider consulting a professional if you're uncertain about any repair tasks.
how long Bradford White water heaters last:
Bradford White water heaters are known for their durability and longevity. While the actual lifespan of a water heater can vary depending on factors such as usage, maintenance, water quality, and the specific model, Bradford White water heaters are generally expected to last for a significant number of years.
Typically, Bradford White water heaters have a warranty period ranging from 6 to 10 years, which is an indication of the manufacturer's confidence in their product's durability. However, many water heaters from Bradford White and other reputable manufacturers can often last well beyond the warranty period with proper care and maintenance.
With proper installation, regular maintenance, and adherence to recommended service intervals, a Bradford White water heater can often provide reliable hot water for 10 to 15 years or more. However, it's important to note that this is a general estimate, and individual circumstances may vary.
To maximize the lifespan of your Bradford White water heater, consider following these guidelines:
1. Proper installation: Ensure that the water heater is correctly installed according to the manufacturer's instructions and local plumbing codes. Improper installation can lead to performance issues and potential damage.
2. Regular maintenance: Follow the recommended maintenance procedures outlined in the user manual. This may include flushing the tank to remove sediment buildup, checking and replacing sacrificial anode rods, inspecting and cleaning the burner (for gas water heaters), and verifying proper venting and pressure relief valve operation.
3. Water quality considerations: If your area has hard water or other water quality issues, consider installing a water softener or other appropriate water treatment systems to reduce mineral buildup and potential corrosion within the water heater.
4. Prompt repairs: If you notice any issues with your water heater, such as leaks, inconsistent heating, or unusual noises, address them promptly to prevent further damage. Contact a professional plumber or Bradford White's authorized service center for assistance.
Remember, these are general guidelines, and specific care and maintenance requirements may vary depending on the model and type of Bradford White water heater you own. Always refer to the manufacturer's instructions and consult with Instally if you have any concerns or questions about your water heater's maintenance.

Description of a water heater's energy efficiency rating:
A water heater's energy efficiency rating provides information about how efficiently the unit converts energy (such as gas or electricity) into heat to warm the water. The rating helps consumers understand the efficiency of different models and make informed choices to reduce energy consumption and utility costs.
The energy efficiency rating of a water heater is typically expressed as an Energy Factor (EF) or Uniform Energy Factor (UEF). These ratings take into account various factors that impact efficiency, including standby heat loss, cycling losses, and recovery efficiency.
1. Energy Factor (EF): The Energy Factor is a measure of a water heater's overall efficiency, including both the energy used to heat the water and the energy lost during standby periods. A higher EF indicates a more energy-efficient unit. EF is usually calculated for storage tank water heaters.
2. Uniform Energy Factor (UEF): UEF is a standardized measurement introduced in 2015 that replaced EF for some water heater categories. UEF incorporates more accurate calculations to better represent real-world usage and considers factors like cycling and standby losses. Like EF, a higher UEF indicates greater energy efficiency. UEF is used for tankless water heaters and certain other types of water heaters.

It's important to note that energy efficiency ratings can vary depending on the type and size of the water heater. Tankless water heaters generally have higher efficiency ratings than traditional storage tank water heaters due to their on-demand heating design and elimination of standby heat loss.

In addition to the energy efficiency rating, it's helpful to consider other features like insulation quality, smart controls, and energy-saving modes when evaluating the overall efficiency of a water heater.
When comparing different water heater models, it's recommended to look for the Energy Star certification. The Energy Star label indicates that a product meets strict energy efficiency criteria set by the Environmental Protection Agency (EPA) and can provide significant energy savings compared to standard models.

Understanding the energy efficiency rating of a water heater allows consumers to select models that can help lower energy consumption, reduce greenhouse gas emissions, and potentially save money on utility bills over the long term.


Bradford White water heater comparison to Rheem water heaters:
Both Bradford White and Rheem are reputable manufacturers of water heaters. Please see below for comparison details
Reputation: Both Bradford White and Rheem have established themselves as trusted brands in the water heater industry with a history of producing reliable products.

Product Range: Both companies offer a wide range of water heater models to suit various needs, including gas, electric, tankless, and hybrid water heaters.

Energy Efficiency: Both Bradford White and Rheem offer energy-efficient models that meet industry standards. Look for Energy Star certified models from either brand to ensure optimal energy efficiency.

Warranty Coverage: Both brands provide warranty coverage for their water heaters, typically ranging from 6 to 10 years for standard models. The specific warranty terms and conditions can vary based on the model and type of water heater.

Customer Support: Both companies have customer support teams to assist with inquiries, warranty claims, and technical support. It's important to review the customer service reputation and availability in your specific area.

When comparing specific models between Bradford White and Rheem water heaters, consider factors such as:
Capacity: Ensure the water heater capacity meets your hot water needs, considering factors like household size and usage patterns.
Energy Efficiency: Compare the Energy Factor (EF) or Uniform Energy Factor (UEF) ratings to assess the efficiency of the models you are considering.
Features: Consider additional features such as digital controls, self-cleaning functionality, or smart home compatibility based on your preferences.
Price: Compare the pricing of comparable models from both brands to determine the best value for your budget.

Bradford White water heater specs
Bradford White water heaters offer a variety of models with different specifications to meet various hot water needs. Here are some common specifications and features you may find in Bradford White water heaters:

Capacity: Bradford White offers a range of tank sizes to accommodate different hot water demands, typically ranging from 30 gallons to 100 gallons or more for residential models. Commercial models can have even larger capacities.
Energy Source: Bradford White water heaters are available in gas (natural gas or propane) and electric models. Gas models utilize a burner system, while electric models use heating elements to heat the water.

Efficiency Rating: Bradford White water heaters have Energy Factor (EF) ratings or Uniform Energy Factor (UEF) ratings, which indicate their energy efficiency. Higher EF or UEF ratings indicate greater efficiency.

Venting: Gas water heaters from Bradford White require proper venting to remove combustion gases. Depending on the model, you may need to consider vertical or horizontal venting options.

Recovery Rate: The recovery rate specifies how quickly a water heater can heat a specific amount of water. It is typically measured in gallons per hour (GPH) and indicates the rate at which the water heater can replenish hot water.

Insulation: Bradford White water heaters are insulated to reduce standby heat loss. Insulation levels can vary between models, with higher-quality insulation contributing to better energy efficiency.
Anode Rod: Bradford White water heaters are equipped with a sacrificial anode rod that helps protect the tank from corrosion. Regular inspection and replacement of the anode rod are essential for long-term performance.

Safety Features: Bradford White water heaters include safety features such as temperature and pressure relief valves (T&P valves) to prevent excessive temperature and pressure buildup.

These are general specifications and features that can be found in Bradford White water heaters. However, it's important to note that specific models may have additional features or variations in specifications. To obtain precise and detailed specifications for a particular Bradford White water heater model, it's recommended to visit the Bradford White website or consult the product documentation provided by the manufacturer.

How Many gallons of hot water does a regular household use ?
Shower 20 gallons
Bath 20 gallons
Shaving 2 gallons
Hands and Face Washing 4 gallons
Hair Shampoo 4 gallons
Hand Dish Washing 4 gallons
Automatic Dish Washing 14 gallons
Food Preparation 5 gallons
Wringer Clothes Washer 26 gallons
Automatic Clothes Washer 32 gallons
b. Estimate unusual peak draw demand. Whirlpool baths, hot tubs, and mutltiple head showers require large
quantities of hot water in a short period of time. Contact fixture manufacturer for quantity of water required.
Generally speaking, these circumstances can only be met with larger storage volumes.
c. Domestic Water Temperature. Most residential usage will be satisfied with 119ºF water, the temperature
setting recommended by the Consumer Product Safety Commission. Some applications such as laundry and
dishwashers may require a higher temperature.
Ratings can be improved by increasing thermostat setting and using a mixing valve to temper the
hot water to the proper temperature. When temperatures greater than 119ºF are required, use a mixing valve at
the outlet of the water heater or anti-scald fittings at point of use.

We are proud to serve in following areas:
Town of Hempstead NY 11549, 11550, 11551
Town of Oyster Bay NY 11542, 11545, 11547, 11548, 11560
Town of North Hempstead NY 11001, 11005, 11020, 11021, 11022
Town of Long Beach NY 11561
Town of Glen Cove NY 11542, 11560, 11579
Town of Islip NY 11506, 11722, 11751
Town of Babylon NY 11701, 11702, 11703, 11704, 11707
Town of Huntington NY 11721, 11724, 11740, 11743
Town of Smithtown NY 11725, 11754, 11780, 11787
Town of Brookhaven NY 11719, 11733, 11772 11776,11777, 11790, 11794
Town of Riverhead NY 11901, 11931
Town of Southampton NY 11713, 11901, 11932, 11933, 11941
Town of East Hampton NY 11930, 11937, 11944, 11954, 11963, 11975
Town of Southold NY 11935, 11939, 11944,11948