PROSELECT® Force Boilers FORCEVFO-3E Force™ Residential Oil Boiler 105 MBH- price is for single zone boiler without coil. Item 1124. each additional section is $450 additional

Sale price $6,690 includes Removal of Old unit and dispose, supply and Install new Unit each additional section is $450 additional 

VFO
Oil-Fired
Cast Iron
Water Boiler

Standard Features

ENERGY STAR® certified 87% AFUE
models available
• Available with tankless water heater
(DHW coil)
• Chimney vented
• Cast iron sectional heat exchanger
– Assembled with reliable, long life,
metal push nipples
• Swing-away cast iron burner door
• Grundfos® Alpha2™ high-efficiency
ECM circulator
• Beckett® AFG burner and
GeniSys™ primary control

• Hydrolevel® HydroStat 3250-Plus
combination high limit/circulator
relay control
– Energy-saving thermal targeting
software, outdoor reset available

Minimum chimney requirements: 8"w x 8"d x 15'h
* Tankless coil is optional, for model numbers with tankless coil, add a “T” after “FORCEVFO” (eg: FORCEVFOT-5-190); “ALT1” column numbers for boilers
featuring tankless coils, add “T” as a suffix (eg: FORCEVFO3ET)
** Requires field installation of Hago or Delevan replacement nozzle supplied with boiler
(1) MBH refers to thousands of BTU per hour
(2) Based on standard test procedure prescribed by the United States Department of Energy at combustion conditions of 13.0% CO2
(3) Net AHRI Ratings are based on piping and pickup allowance of 1.15 for water

Additional Standard Features

• Fully packaged sectional oil boiler
• Limited lifetime warranty on heat exchanger, 1-year manufacturer’s
warranty on parts
• Tridicator temperature/pressure gauge
• ASME relief valve (30 psi)
• Drain valve
• Fuel pump
• Electronic ignitor
• Made in U.S.A.

What does Energy star mean?
ENERGY STAR program is a voluntary program run by the United States Environmental Protection Agency (EPA) that promotes energy efficiency in various products, including boilers. ENERGY STAR certified oil boilers meet strict energy efficiency guidelines set by the EPA, making them more environmentally friendly and cost-effective to operate.
High Efficiency: ENERGY STAR certified oil boilers are designed to be highly efficient, meaning they convert a larger percentage of fuel into usable heat compared to conventional boilers. This efficiency helps reduce fuel consumption and lower heating costs.

Advanced Technology: These boilers often incorporate advanced technologies, such as electronic ignition, modulating burners, and improved heat exchangers, to optimize energy usage and reduce waste.

Reduced Emissions: Higher efficiency in ENERGY STAR boilers typically leads to lower greenhouse gas emissions, helping to reduce the environmental impact of heating your home.

Savings: By using less fuel and having lower operating costs, ENERGY STAR certified oil boilers can save homeowners money on their heating bills over the boiler's lifespan.


Improved Comfort: Efficient operation means more consistent and reliable heating, ensuring a comfortable living environment throughout the colder months.

Quality and Reliability: ENERGY STAR certified boilers are often manufactured by reputable companies with a track record of producing high-quality, reliable heating equipment.

When looking for ENERGY STAR certified oil boilers, it's essential to consider the boiler's efficiency rating, which is measured as Annual Fuel Utilization Efficiency (AFUE). A higher AFUE percentage indicates greater efficiency. ENERGY STAR boilers typically have AFUE ratings of 87% or higher, while some models can achieve AFUE ratings above 95%.



It's important to note that boiler technology and product offerings can change over time, so I recommend checking the official ENERGY STAR website or consulting with manufacturers directly to find the most up-to-date information on specific ENERGY STAR certified oil boilers available in the market.

How many hours on average oil boiler run during the winter to heat a home in Long Island NY?
The number of hours an oil boiler runs during the winter to heat a home can vary significantly based on several factors, including:

Climate: Colder regions require more heating hours compared to milder climates.

Home Size: Larger homes typically require more heating hours than smaller ones.

Insulation: Well-insulated homes retain heat better, reducing the need for the boiler to run continuously.

Temperature Settings: Higher thermostat settings result in longer boiler run times.

Efficiency of the Boiler: More efficient boilers consume less fuel and, therefore, run for fewer hours.

Occupancy and Habits: The number of occupants, their habits, and daily routines can affect heating needs.

Other Heat Sources: If the home has alternative heating sources like a fireplace or heat pump, the boiler may run for fewer hours.

Due to these variables, it's challenging to provide an exact average of the hours an oil boiler runs during winter to heat a home. However, some estimates suggest that a typical home in a cold climate might require the boiler to run anywhere from 8 to 12 hours per day during the coldest months of winter. In milder climates, the hours of operation might be considerably lower.

Keep in mind that the best way to determine the actual heating hours for a specific home is to monitor the boiler's runtime over several weeks during the winter. This can be done using the boiler's built-in monitoring system or a separate energy monitoring device. Additionally, consulting with a heating professional can help in assessing the specific heating needs of your home and optimizing your heating system's efficiency.

what does Annual maintenance of oil burner include
Annual maintenance of an oil burner is essential to ensure its efficient and safe operation. Regular maintenance performed by a qualified technician can help prevent breakdowns, extend the life of the equipment, and maintain optimal fuel efficiency. Here are some typical tasks included in the annual maintenance of an oil burner:

Cleaning: The burner, combustion chamber, and heat exchanger are thoroughly cleaned to remove soot, debris, and any buildup that can affect the burner's performance.
Inspecting and Replacing Filters: The oil filter and, if applicable, the fuel pump strainer are inspected and replaced if clogged or dirty. Clean filters ensure a steady flow of clean fuel to the burner.

Checking and Adjusting Ignition System: The ignition system, including the electrodes and ignition transformer, is inspected and adjusted to ensure proper ignition of the oil.

Adjusting Combustion Settings: The technician checks the combustion settings, including fuel pressure, air-to-fuel ratio, and burner head positioning. Proper adjustment ensures efficient and clean combustion.

Inspecting and Cleaning the Flue: The flue and chimney are inspected and cleaned to remove any blockages, ensuring proper venting of exhaust gases.

Lubricating Moving Parts: The technician lubricates the motor and other moving parts to reduce friction and prevent premature wear.

Testing Safety Controls: Safety controls, such as high-limit switches and flame sensors, are tested to ensure they are functioning correctly.

Checking Oil Tank and Lines: The oil tank and supply lines are inspected for leaks, damage, or signs of corrosion.

Testing Efficiency: The technician may perform an efficiency test to ensure the burner is operating at its optimal efficiency level.

Inspecting and Replacing Nozzle: The burner nozzle, responsible for spraying oil into the combustion chamber, is inspected and replaced if worn or damaged.

Inspecting Belts and Pulleys: For older models with belt-driven systems, the technician inspects belts and pulleys for wear and proper tension.

Providing Recommendations: Based on the inspection, the technician may provide recommendations for any necessary repairs or upgrades to improve the system's performance.

Remember that proper maintenance of an oil burner is crucial for safety and efficiency. If you own an oil burner, it's essential to have it serviced annually by a qualified HVAC technician or oil burner specialist to ensure it continues to operate reliably and safely.

what home owners need to do maintain their oil boiler in good condition?
Homeowners can take several proactive steps to maintain their oil boiler in good condition and ensure its efficient and safe operation. Here are some essential maintenance tasks that homeowners can do:
Regular Cleaning: Keep the area around the boiler clean and free of dust and debris. Additionally, dust or vacuum the exterior of the boiler to prevent buildup.

Monitor Fuel Levels: Regularly check the oil tank's fuel levels and ensure that there is an adequate supply of oil to avoid running out during the heating season.

Inspect for Leaks: Check for any signs of oil leaks around the boiler and oil supply lines. If you notice any leaks, have them repaired immediately to prevent safety hazards and wasted fuel.

Change Filters: Homeowners can change the oil filter regularly or as recommended by the boiler manufacturer. A clogged filter can disrupt fuel flow and affect the boiler's performance.

Check Flue and Chimney: Visually inspect the flue and chimney for any blockages, debris, or signs of damage. Proper ventilation is crucial for safe and efficient operation.

est Safety Controls: Familiarize yourself with the boiler's safety controls, such as high-limit switches and flame sensors. Periodically test these controls to ensure they are working correctly.

Maintain Thermostat Settings: Keep the thermostat settings at a reasonable level, and avoid frequent temperature adjustments, as this can put unnecessary stress on the boiler.

Bleed Radiators: If your heating system uses radiators, bleed them annually to release any trapped air, ensuring efficient heat distribution.

Observe Performance: Pay attention to any unusual noises, odors, or changes in the boiler's performance. If you notice anything out of the ordinary, contact a qualified technician for inspection and repairs.

Schedule Professional Maintenance: While homeowners can perform some maintenance tasks, it's essential to have the boiler professionally inspected and serviced at least once a year by a qualified HVAC technician or oil burner specialist. A professional will perform more in-depth maintenance and address any issues that may not be apparent to the homeowner.

Remember, while some basic maintenance tasks can be performed by homeowners, it is crucial to leave complex or technical issues to trained professionals. Regular professional maintenance is the best way to ensure your oil boiler remains in good condition and operates safely and efficiently throughout the heating season.


We are proud to serve in following areas
Town of Hempstead NY 11549, 11550, 11551
Town of Oyster Bay NY 11542, 11545, 11547, 11548, 11560
Town of North Hempstead NY 11001, 11005, 11020, 11021, 11022
Town of Long Beach NY 11561
Town of Glen Cove NY 11542, 11560, 11579
Town of Islip NY 11506, 11722, 11751
Town of Babylon NY 11701, 11702, 11703, 11704, 11707
Town of Huntington NY 11721, 11724, 11740, 11743
Town of Smithtown NY 11725, 11754, 11780, 11787
Town of Brookhaven NY 11719, 11733, 11772 11776,11777, 11790, 11794
Town of Riverhead NY 11901, 11931
Town of Southampton NY 11713, 11901, 11932, 11933, 11941
Town of East Hampton NY 11930, 11937, 11944, 11954, 11963, 11975
Town of Southold NY 11935, 11939, 11944,11948